ARDUINO SOFTWARE

       For this project i use Arduino Software for display the output data or result, signal input enter into the microcontroller of arduino that is at atmega 328P to run the software program that being initialize to get the output for display result at the LCD monitor.

      Arduino is an open-source single-board microcontroller; the hardware consists of a simple open hardware design for the arduino board with an Atmel AVR processor and on-board I/O support. The software consists of a standard programming language and the boot loader that runs on the board. arduino hardware is programmed using a Wiring based language (syntax + libraries), similar to C++ with some simplifications and modifications, and a Processing-based IDE.    

Arduino Software

A screenshot of the Arduino IDE showing a

simple example program.

Developer(s): Arduino Software

 Stable release: 022 / December 24, 2010; 3 months ago

 Written in:  Java

Operating system: Cross-platform

Type:  Integrated development environment

License: LGPL or GPL license

Website: http://www.arduino.cc/en/

Figure 1: Arduino Screenshot Software

         The arduino duemilanove (2009) is a microcontroller board based on the atmega168 (datasheet) or atmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as pulse width modulator, PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Arduino Duemilanove

         This is the microcontroller board that is used to run the software program of arduino when it attached to the power supply laptop with 5 volt maximum. Then after uploading the program at atmega 328p, this ic can stand alone with their own circuit to run the software of the programming with hardware for this project, Electronic Stethoscope.